FULL TIME
Job Requirements
• The candidate shall interact and work with cross functional teams like Mechanical Engineer, Test Engineer, Lab team and Engineering team.
• The candidate shall be able to study and understand the project requirements.
• The candidate shall be capable in selecting suitable data acquisition system, controls system design, software architecture and development.
• Develop application software for new test setup and requirements.
• Upgrade existing software to cater new test requirements.
• Selection of sensors, integrating with control system and software as per requirement.
• Documentation of software design, changes and updation of user manual/SOP.
• Upgrading existing LabVIEW application software to new versions based on requirement.
• Troubleshooting and addressing any issues in controls and software.
Testing and Validate application software before deploying to the test setup. Preparing User manual/SOP and train the test engineer.
Work Experience
• Candidate should have minimum qualification in B.E/BTech in Electronics/Electrical/Instrumentation/Computer Science with relevant experience of 5 to 10 years in LabVIEW.
• Experienced in using different versions of LabVIEW and latest version of LabVIEW with toolkits.
• Understand the requirement, design, and develop the NI LabVIEW based data acquisition and control system.
• Experienced in developing modular, scalable applications using standard architecture in LabVIEW.
• Experienced in developing LabVIEW application in Windows, RT Pharlap.
• Experienced in using and integrating all types of NI hardware i.e., PXI, CRIO, CDaq system etc.
• Experienced in working different communication protocols like TCP/IP, UDP, Serial, USB, CAN, GPIB etc.
• Experienced in integration any Third-Party programable Instruments (Non-NI) i.e., Multimeter, Power Supplies, Oscilloscopes, Power Analyzers, Micro ohm meter etc.
• Experience in integration of any Third-Party controllers.
• Knowledge and experience in developing NI software driver for third party hardware and software will be added advantage.
• Good experience and knowledge in using the INCA software.
• Good understanding and experience in using ECU.
• Good experience in sensor selection, sensor wiring and troubleshooting the signals.
• Good experience in control panel schematics study, design, control panel hardware selection and troubleshooting.
• Ability to work individually and as a team.
• Good experience in interfacing Induction motors with VFD and Control system. Good knowledge in VFD basic configuration.
• Good experience in building UUT test setup, Daq and Controls I/O mapping.
• Hands on experience in signal level and system level troubleshooting of data acquisition and automated test system.
• Good documentation skills for capturing requirements, preparation of design and User Manual.
Apply Now
• The candidate shall interact and work with cross functional teams like Mechanical Engineer, Test Engineer, Lab team and Engineering team.
• The candidate shall be able to study and understand the project requirements.
• The candidate shall be capable in selecting suitable data acquisition system, controls system design, software architecture and development.
• Develop application software for new test setup and requirements.
• Upgrade existing software to cater new test requirements.
• Selection of sensors, integrating with control system and software as per requirement.
• Documentation of software design, changes and updation of user manual/SOP.
• Upgrading existing LabVIEW application software to new versions based on requirement.
• Troubleshooting and addressing any issues in controls and software.
Testing and Validate application software before deploying to the test setup. Preparing User manual/SOP and train the test engineer.
Work Experience
• Candidate should have minimum qualification in B.E/BTech in Electronics/Electrical/Instrumentation/Computer Science with relevant experience of 5 to 10 years in LabVIEW.
• Experienced in using different versions of LabVIEW and latest version of LabVIEW with toolkits.
• Understand the requirement, design, and develop the NI LabVIEW based data acquisition and control system.
• Experienced in developing modular, scalable applications using standard architecture in LabVIEW.
• Experienced in developing LabVIEW application in Windows, RT Pharlap.
• Experienced in using and integrating all types of NI hardware i.e., PXI, CRIO, CDaq system etc.
• Experienced in working different communication protocols like TCP/IP, UDP, Serial, USB, CAN, GPIB etc.
• Experienced in integration any Third-Party programable Instruments (Non-NI) i.e., Multimeter, Power Supplies, Oscilloscopes, Power Analyzers, Micro ohm meter etc.
• Experience in integration of any Third-Party controllers.
• Knowledge and experience in developing NI software driver for third party hardware and software will be added advantage.
• Good experience and knowledge in using the INCA software.
• Good understanding and experience in using ECU.
• Good experience in sensor selection, sensor wiring and troubleshooting the signals.
• Good experience in control panel schematics study, design, control panel hardware selection and troubleshooting.
• Ability to work individually and as a team.
• Good experience in interfacing Induction motors with VFD and Control system. Good knowledge in VFD basic configuration.
• Good experience in building UUT test setup, Daq and Controls I/O mapping.
• Hands on experience in signal level and system level troubleshooting of data acquisition and automated test system.
• Good documentation skills for capturing requirements, preparation of design and User Manual.